Product catalog
- HM10 High - accuracy Pressure Sensor
- HM20 General - type Pressure Transducer Description
- HM22 High - accuracy Pressure Transducer
- HM23 Special Pressure Transducer for Air Conditioner, Refrigerating and Compressor
- HM23Y Special Pressure Transducer for Oilfield and Mining Well
- HM24 Economical Pressure Sensor and Transducer
- HM25 Industrial - type Pressure Transducer
- HM26 Ceramic Capacitor Pressure Transducer
- HM27 Vacuum / Absolute Pressure Transducer
- HM28 Sapphire Pressure Transducer
- HM29 Digital • Intellectual Pressure / Differential Pressure Transducer
- HM50 Anti - corrosive Pressure Transducer
- HM60 Anti - explosive Pressure Transducer
- HM70 Hygienic Flat - membrane Pressure Transducer
- HM80 High - temperature Pressure Transducer
- HM90 High - frequency Dynamic Pressure Transducer
- HM91 Micro Pressure Sensor and Transducer
Contact Us
南京宏沐科技有限公司
销售部地址：南京市高铁南站南广场
电话：400-063-9658
手机：18951963348同微信号
传真：025-52150140
邮箱：njhongmu@hmsensor.com
HM90 High - frequency Dynamic Pressure Transducer
Description
In such scientific test and modern instruments and meters as military engineering, chemical explosion test, petroleum investigation and mining as well as petroleum well test, material, mechanics, civil engineering, geo – mechanics, trauma medical, hydraulic power mechanical test etc, undistorted measurement of some frequently – changing, fast and steep pressure wave form rise is made for the dynamic pressure form, amplitude, and effective value, it is required that the pressure sensors used shall have high intrinsic frequency, very short rising time, and wide and good response frequency band to ensure sufficient dynamic pressure measuring accuracy. HM90 high - frequency dynamic pressure transducer is specially designed for this purpose. It adopts German HELM made high – performance chip, using micro machining technology to make the integrated silicon chip small effective dimensions, and high intrinsic frequency. It features good elastic mechanics characteristics, of which comprehensive perform is better than that of piezoresistive dynamic pressure sensor. It is ideal for dynamic pressure measurement.
Features of Product
☆ Provided with enclosure fully made of stainless steel, with excellent corrosion resistant performance
☆ Wide pressure measuring range
☆ Intrinsic frequency up to 2MHz
☆ Working stability
☆ Strong disturbance immunity
☆ Genuine imported set with stable performance
☆ Small dimensions, light weight, full variants and high ratio of performance to costs
☆ Wide range of measuring medium
Application of Product
☆military engineering
☆ Chemical explosion test
☆ Petroleum investigation and mining as well as petroleum well test
☆ Mechanics
☆ Civil engineering
☆ Geo – mechanic
☆ Trauma medical
☆ Hydraulic power mechanical test
Details
Technical Data |
| HM90 High - frequency Dynamic Pressure Transducer | |||
Measuring range | -100KPa ~ 0 ~ 1Kpa ...20KPa … 100MPa | ||||
Overloading capacity | Two times of FS pressure ((where over pressure for 100MPa is designed with 1.1 times of FS pressure) | ||||
Pressure type | Gauge pressure or absolute pressure | ||||
Medium to be measured | The gas or liquid compatible with 316 stainless steel | ||||
Overall accuracy | 0.1% FS | 0.25% FS | 0.4% FS | ||
Intrinsic frequency | 150KHz ~ 700KHz | 500KHz ~ 1MHz | 1MHz ~ 2MHz | ||
Band width of transducer | 0 ~ 1KHz ~ 3KHz | 0 ~ 20KHz | 0 ~ 200KHz | ||
Rising time | 0 ~ 0.2mS ~ 75μS | 0 ~ 12μS | 0 ~ 1μS | ||
Long-term stability | Typical: ± 0.1% FS / year | Maximum: ± 0.02% FS / year | |||
Operating temperature | -40℃ ~ 85℃ (generally) | -10℃ ~ 250℃ (Specially) | |||
Zero point temperature drifting | Typical: ± 0.02% FS / ℃ | Maximum: ± 0.05% FS / ℃ | |||
Sensitivity temperature drifting | Typical: ± 0.02% FS / ℃ | Maximum: ± 0.05% FS / ℃ | |||
Range of power supplying | 12 ~ 36V DC (24V DC generally) | ||||
Signal output | 4 ~ 20mA / 1 ~ 5V DC / 0 ~ 5V DC | ||||
Load resistance | ≤ (U-12) / 0.02Ω | ||||
Enclosure protective degree | Plug type (IP 65); Cable type (IP 67) | ||||
Response time | ≤3 ms | ||||
Tolerance of vibration | ≤ ± 0.01% FS ( Axles X, Y , Ｚ， 200Hz / g ) | ||||
Port and enclosure | Stainless steel 1Cr18Ni9Ti | ||||
O-ring | Fluorubber | ||||
Sensor membrane | Stainless steel 316L or mono – crystalline silicon | ||||
Safe explosion – proof | Ex ia II CT5 | ||||
Insulation resistance | 100MΩ 500V DC | ||||
Resolution | Infinite small (theoretical) 1 / 100000 (general) | ||||
Product selection
HM90 | High - frequency Dynamic Pres. Transducer |
| Guideline of Selection | ||||||||||
| Type of pressure | Gauge pressure ( G, may not be indicated), Absolute pressure (A) | |||||||||||
|
| Range | Measuring Range | ||||||||||
|
| (0 ~ X KPa or 0 ~ X MPa | |||||||||||
|
|
| Code | Band width of transducer | |||||||||
|
|
| H1 | 0 ~ 1KHz ~ 3KHz | |||||||||
|
|
| H2 | 0 ~ 20KHz | |||||||||
|
|
| H3 | 0 ~ 200KHz | |||||||||
|
|
|
|
| Code | Overall accuracy (linear + repeatability + lagging) | |||||||
|
|
|
|
| 1 | ± 0.4% FS | |||||||
|
|
|
|
| 2 | ± 0.25% FS | |||||||
|
|
|
|
| 3 | ± 0.15% FS | |||||||
|
|
|
|
|
|
| Code | Signal Output | |||||
|
|
|
|
|
|
| A1 | 4 ~ 20mA | |||||
|
|
|
|
|
|
| V1 | 1 ~ 5V DC | |||||
|
|
|
|
|
|
| V2 | 0 ~ 5V DC | |||||
|
|
|
|
|
|
|
|
| Code | Additional functions | |||
|
|
|
|
|
|
|
|
| F1 | M20 x 1.5 external thread | |||
|
|
|
|
|
|
|
|
| F2 | G 1 / 4 external thread | |||
|
|
|
|
|
|
|
|
| F0 | Special | |||
|
|
|
|
|
|
|
|
| W1 | Cable type (IP67, 2m) | |||
|
|
|
|
|
|
|
|
| W2 | Socket type (IP65, DIN 43650) | |||
|
|
|
|
|
|
|
|
| P | Flushed membrane | |||
|
|
|
|
|
|
|
|
| E | Intrinsically safe explosion - proof type Ex ia II CT5 | |||
|
|
|
|
|
|
|
|
| T1 | Free field (specially used for blasting) | |||
|
|
|
|
|
|
|
|
| T2 | High - temperature resistant type: Up to 250 ℃ for balancing operating | |||
|
|
|
|
|
|
|
|
|
|
|
| ||
HM90 ( 0 ~ 500KPa) | — H1 | — 1 | — V2 | — F1 | — W1 -E -T2 High - frequency Dynamic Pres. Transducer | ||||||||
Tips of Selection
- The frequency output of the product may be optional three items (H1, H2, and H3). The user may determine the most suitable range of frequency output to selection of product more economical according to industrial and mining requirements.
- Please contact us in case of the other special requirements and clearly indicate them when placing an order.
